Monitoring The system can also be remotely monitored using a WiFi or GPRS dongle. Parallel scaling is supported. Charge controller The MPPT charge controller lowers the voltage of panels to the required level to charge the battery. The current is raised with the same ratio the voltage is lowered. This continuously happens during the day to optimize the use of energy. This is dependent on the power of the sun, the angle and the temperature and health of the panels. The charge controller also makes sure the battery will not be overcharged, but also not fully discharged. Capacity expansion The system’s capacity can be expanded up to 30kW by combining a total of six of these units in parallel operation. Key Feature: Integrated MPPT charge controller. Equalization charging function. Work with battery or without battery. Maximum PV input voltage up to 450VDC. Configurable grid or solar input priority. Optional WIFI/ GPRS remote monitoring. Support parallel operation for capacity expansion up to 30kW. PV and Grid power the load jointly if PV energy unsufficient. Flexibly schedule the Inverter charging and discharging time. Specifications: Model Growatt SPF 5000 ES Battery Voltage 48VDC Battery Type Lithium/Lead-acid Rated Power 5000VA/5000W Parallel Capability Yes, 6 units maximum AC Voltage Regulation (Battery Mode) 230VAC ± 5% @ 50/60Hz Surge Power 10000VA Efficiency 93% Waveform Pure sine wave Maximum PV Array Power 6000W MPPT Range @ Operating Voltage 120VDC ~ 430VDC Number of Independent MPP Trackers/Strings Per MPP Tracker 1/1 Maximum PV Array Open Circuit Voltage 450VDC Maximum Solar Charge Current 100A AC Charge Current 80A AC Input Voltage 230 VAC Dimensions 330x485x135mm | 12kg Operating Temperature 0°C – 55°C Storage Temperature -15°C – 60°C
