Description Premium Inline Granular Activated Coconut Carbon T33 Filter – 2″ × 10″ NSF 42 Certified | Made in Taiwan Upgrade your water purification system with this premium inline granular activated carbon (GAC) filter, designed to serve as the final polishing stage in countertop and under-sink Reverse Osmosis (RO) systems. This filter enhances water quality by improving taste and eliminating residual odors after membrane filtration. Key Features Purpose: Reduces chlorine, chloramine, and chemical residues that negatively affect taste and odor Filter Media: Granular Activated Coconut Shell Carbon (GAC) Final Polishing Stage: Improves water freshness and clarity Certification: NSF/ANSI 42 certified for material safety and structural integrity Origin: Manufactured in Taiwan under strict quality standards Specifications Filter Size: 10″ Length × 2″ Diameter Connection: 1/4″ Female Pipe Thread (FPT) Included: 2 Quick-Connect elbow adapters (1/4″ or 3/8″ OD tubing compatible) Capacity: Up to 2,500 gallons or 6–12 months (depending on water quality and usage) Operating Temperature: 36°F – 100°F (2°C – 38°C) Flow Rate: 0.50 GPM Maximum Pressure: 100 PSI Micron Rating: Not applicable (taste & odor filtration) Compatibility & Applications Compatible with most standard countertop and under-sink RO systems using inline post-carbon filtration. Ideal for drinking water, cooking, coffee, tea, and ice makers, delivering clean, fresh-tasting water for daily use. Installation Tips Tubing & Quick-Connect Notes: Common RO tubing sizes are 1/4″ OD and 3/8″ OD. Cut tubing with a clean, straight 90° cut for the best seal. Push tubing fully into the fitting until it stops, then gently pull back to confirm it locks in place. Important Use Notes Use with cold water only. For best performance, install as the final stage after the RO membrane. Not Sure Which Option to Choose? If unsure, select Universal Fit (includes 4 elbow adapters for both 1/4″ & 3/8″ OD tubing connections). Message us before ordering—we’ll help you choose the correct fittings. ▶️ Video Installation Guidance Because RO systems and plumbing layouts can vary, there are multiple correct ways to install an inline filter. Search YouTube for “inline RO filter installation”. Select a video that matches your system type (under-sink RO, countertop RO, post-filter installation, etc.). Visual step-by-step videos can make installation easier and faster. Installation Tips Tubing & Quick-Connect Notes: Common RO tubing sizes are 1/4″ OD and 3/8″ OD. Cut tubing with a clean, straight 90° cut for the best seal. Push tubing fully into the fitting until it stops, then gently pull back to confirm it locks in place. Important Use Notes Use with cold water only. For best performance, install as the final stage after the RO membrane. Not Sure Which Option to Choose? If unsure, select Universal Fit (includes 4 elbow adapters for both 1/4″ & 3/8″ OD tubing connections). Message us before ordering—we’ll help you choose the correct fittings. ▶️ Video Installation Guidance Because RO systems and plumbing layouts can vary, there are multiple correct ways to install an inline filter. Search YouTube for “inline RO filter installation”. Select a video that matches your system type (under-sink RO, countertop RO, post-filter installation, etc.). Visual step-by-step videos can make installation easier and faster.
